PART |
Description |
Maker |
M25PX64-VMF6TP |
64-Mbit, dual I/O, 4-Kbyte subsector erase, serial flash memory with 75 MHz SPI bus interface
|
Numonyx B.V
|
M25PX64-STVME6E M25PX64-STVME6F M25PX64-STVMF6E M2 |
64-Mbit, dual I/O, 4-Kbyte subsector erase, serial flash memory with 75 MHz SPI bus interface
|
Numonyx B.V
|
M50FLW040AK5P M50FLW040ANB5P M50FLW040A06 M50FLW04 |
4-Mbit (5 ??64 Kbyte blocks 3 ??16 ??4 Kbyte sectors) 3-V supply Firmware Hub / low-pin count Flash memory 4-Mbit (5 】 64 Kbyte blocks 3 】 16 】 4 Kbyte sectors) 3-V supply Firmware Hub / low-pin count Flash memory
|
STMICROELECTRONICS[STMicroelectronics]
|
AT89C51CC03 |
8-bit microcontroller with CAN controller and 64-Kbyte Flash. 2-Kbyte RAM, 2-Kbyte EEPROM, SPI. Power Fail Detect (no need for external brown- out). Pinout compatible with T89C51CC01.
|
Atmel
|
NP5Q128A13ESFC0E NP5Q128AE3ESFC0E |
128-Mbit, Quad/Dual/Single Serial Interface, 128-Kbyte Sectors Phase Change Memory (PCM) with 66MHz SPI Bus Interface
|
Numonyx B.V
|
F273-CEG-P F273-CEG-P-TR F273-CEG-T-TR ST10F273E |
16-bit MCU with 512 Kbyte Flash memory and 36 Kbyte RAM
|
STMicroelectronics
|
ST10F272M12 |
16-bit MCU with 256 Kbyte Flash memory and 20 Kbyte RAM
|
STMicroelectronics
|
ST10F271Z1 |
16-bit MCU with 128 Kbyte Flash memory and 12 Kbyte RAM
|
STMicroelectronics
|
ST10F272B ST10F272E |
16-bit MCU with 256 Kbyte Flash memory and 12/20 Kbyte RAM
|
STMicroelectronics
|
M29DW127G M29DW127G70NF6E |
128-Mbit (8 Mbit x16 or 16 Mbit x8 , multiple bank, page, dual boot) 3 V supply flash memory
|
Numonyx B.V
|
N25Q128A11BF840E N25Q128A21BF840E N25Q128A31BF840E |
128-Mbit, 1.8 V, multiple I/O, 4-Kbyte subsector erase on boot sectors, XiP enabled, serial flash memory with 108 MHz SPI bus interface 128-Mbit, 1.8 V, multiple I/O, 4-Kbyte subsector erase on boot sectors, XiP enabled, serial flash memory with 108 MHz SPI bus interface
|
Numonyx B.V http:// Micron Technology
|
SST34HF164G |
(SST34HF162G / SST34HF164G) 16 Mbit Dual-Bank Flash 2/4 Mbit SRAM ComboMemory
|
SST
|